Unser Unternehmen
Jiangyin Bangnuo Machinery Co., Ltd ist ein professioneller Hersteller gewidmet Farbe leichte Stahlkonstruktion, C, Z Stahl-Ausrüstung und Walzen, Biegen Formen Ausrüstung Unternehmen, mit der Konstruktion und Herstellung von verschiedenen Arten von Stahlblech Dicke Walze bilden Produktionslinie Stärke. Gepresste Fliesenfarbe Stahlplatte und C, Z Pflaume Produkte sind weit verbreitet in verschiedenen Arten von großen und kleinen Industrieanlagen, Lagerhallen, Wohn-und Hochhäuser verwendet. Mit der wirtschaftlichen Entwicklung, Gebäude Licht Stahlbau Anwendungen auf die wachsende Popularität der steigenden Nachfrage nach Produktionsanlagen, Produktionsanlagen Automatisierung Anforderungen steigen auch, Unternehmen Investitionen, Forschung und Entwicklung von verschiedenen Arten von Farbe Stahl Druckplatte (W) Produktionslinie und C , Z-Strahl (Pfette) Produktionsanlagen, die Verwendung von einfach, die Produktivität zu verbessern, reduzieren Produktionskosten. Verschiedene vorhandene Modelle der Stahl-Druckplatte (W) C, Z-Strahl (Pfette) automatische Steuerung Produktionslinie sind an der führenden Position im In-und Ausland, mit einer kompakten Struktur, vernünftiges Design, ständig aktualisiert Fortschritt und viel Strut Builders und Produkte der Gunst und Lob.
Unternehmen spezialisiert auf die Herstellung von Dagong Maschinen, Bodenplatte Maschine, Leitplanke Platte Maschine, Wellpappe Maschine, Schere Maschine, Sub-Board-Maschine, Autobahn Leitplanke, Fliesen Maschine Ausrüstung, automatische Fliesenpresse, Eisen Piva Maschine, Eisen Fliesen Maschine, alle automatisch C-förmige Stahlmaschine, glasierte Fliesenmaschine.
Detaillierte Bilder Fütterung:
Adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
|
Feeding type
|
adjustable
|
Feeding width range
|
about 1300mm
|
Entrance and guide roller
|
diameter is ¢76mm, material is SAE1045, HRC48-52° surface with chrome
|
Formteil:
Material of the profile:up to 235Mpa
|
GI or color steel
|
Thickness range
|
0.4-0.7mm
|
Main motor power
|
7.5kw
|
Machine Voltage, Frequency, Phase
|
380 V, 50 Hz, 3Phase
|
Roll station
|
Top layer: about 18 stations (according the final design)
|
Roller material
|
ASTM1045 chrome plated surface with chrome, CNC,
|
Shaft diameter
|
¢70mm material: SAE1045 with quenching and tempering
|
Machine roll forming speed
|
0-15m/min
|
Transmission
|
by chain, one inch, double line
|
Roll former has leveling bolts in the base for adjust the leveling
|
Machine base frame adopt H beam welding steel
|
In the main roll forming machine have 2 buttons for urgency stop if happen any malfunction.
|
Machine adopt new station with chrome as station
|
To avoid accident
|
all of drive part adopt protect cover
|
Color of machine
|
Blue and yellow (or base on customer request)
|
Nachschneidanlage:
Profile transversal cutting device units allowing to cut the bent profile without damaging the metal coating and to assure a smooth cut included;
|
Feeding of the last cut profile from the equipment: automatic if the length of the last profile is not less than 100 mm;
|
Cutting after forming
|
Cut the sheet after roll forming to required length
|
Hydraulic drive uses the same hydraulic unit with pre-cutting
|
Uses two hydraulic cylinders for operation shall include a flow regulator to achieve a uniform lowering knife.
|
Material of blade
|
Cr12, 58-62 HRC hardness
|
Cutting power by hydraulic
|
4KW
|
Working pressure
|
16Mpa adjustable
|
Length measuring
|
Automatic encoder length measuring
|
The cutting sequence is also contained and controlled by the same PLC program
|
Tolerance of length
|
+/- 1.5mm for each piece end product
|
Empfangstabelle: Option 1: Manueller Auslauftisch (zwei Einheiten)
Jointed by 60mm*40mm tube
|
Size
|
1m long*0.8mwide*0.6-1mhigh
|
One out table with two support roller
|
Color
|
bule
|
Quantity
|
1
|
Option 2: 12m automatischer Stapler:
run out motor power
|
0.75KW
|
max speed
|
36m/min
|
max stacking length
|
12m
|
max stacking thickness
|
300mm
|
max stacking weight
|
2 tons
|
computer PLC .modles7-200
|
computer operation screen is TD200
|
Stacker height: stacker can be up and down adjusted to match the height of the two layers of the double layer roll forming machine.
|
Hauptstruktur (Layout) für den Stapler:
Zertifizierungen
Unser Service Pre-Sales Service
* Anfrage und Beratung Unterstützung.
* Probe Testunterstützung.
* Sehen Sie unsere Fabrik.
Kundendienst
* Training, wie man die Maschine instand setzen, trainieren, wie man die Maschine benutzt.
* Ingenieure zur Verfügung Service-Maschinen in Übersee.
Verpackung & Lieferung
Ähnliche Produkte
Produkte Name mit Link 91.8% Antwortrate
Produkte Name mit Link 91.8% Antwortrate
Produkte Name mit Link 91.8% Antwortrate
Produktgruppe : Stahldach- / Plattenrollenformmaschine